30mm White Heat Shrinkable Sleeve 5 meter in Pakistan

Description

30mm White Heat Shrinkable Sleeve (5 meters) in Pakistan BR2566

Description:

Heat Shrink  & Sleeve is a 3:1 flexible tubing offering the advantages of integral, adhesive-lined construction. Heat Shrink & Sleeve is made from flexible polyethylene with an internal layer of special thermoplastic adhesive. The heat-shrinkable outer wall is selectively cross-linked while maintaining the high flow and excellent adhesion of the inner sealant liner. When heated in excess of 121 deg C (250 deg F), the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate. The adhesive forms a flexible bond with a wide variety of rubbers, plastics, and metals. Upon cooling, the adhesive solidifies, forming a permanent, non-drying, flexible and water-resistant barrier. Adhesive reflow will occur at temperatures above 80 deg C.

Features: 

1. Shrink ratio: 2:1 (maximum will shrink to 1/2 of its supplied diameter)

 

2. Operating temperature range: -55 degrees ~ 125 degrees

 

3. Rated voltage: 600 V

 

4. Cutting method: Scissors or sharp knife

 

5. This product has a 2:1 shrink ratio and is up to 600 V, 125 Centigrade.

Specifications:

1. Colour: White
2. Material: Polyethylene
3. Shrink Ratio: 3:1
4. Temp: -45C up to +145C
5. Longitudinal Shrinkage (Lengthwise): Less than 8 %, Insulating Voltage
6. Capability: 600 volts
7. Adhesive Adheres to Most plastics, metals, rubber, Continuous Operating

USE

The item is mainly used for wire connection, joint protection welding, electronic device, protection and insulation treatment, metal protection surface, etc.

Best Online Shopping website for 30mm White Heat Shrinkable Sleeve (5 meters). Here you get a 30mm White Heat Shrinkable Sleeve (5 meters) at a reasonable price in Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Quetta, Multan, and all over Pakistan.

Package Include

1 x 30mm White Heat Shrinkable Sleeve (5 meters)