In stock
Out Stock

VNH2SP30 DUAL DC Monster Moto Driver Shield

SKU: BR5004-HL


VNH2SP30 DUAL DC Monster Moto Driver Shield in Pakistan BR5004


This VNH2SP30 Monster Moto Driver Shield has an NH3SP30 chip which enables it to drive one DC motor. It has an extremely high current capacity of 14A per channel (peak of 30A for a few seconds). The thermal heating is minimal up till 4 to 5 amps. However, it would need a thermal dissipation device like a heat sink or cooling fan for higher currents. Also, the difference in the standard Arduino Motor shield and Monster Motor shield is the change in the driving IC. In the standard Arduino Motor shield the IC used is L298 H bridge IC which has a current capacity of 1 A which is replaced by the VNH3DP30 chip with a 14A continuous current capacity with heat dissipation devices installed. This motor driver also has a thermal shutdown function possible as the thermal output is provided on the analog pin of Arduino.


  1. Capable to drive two DC motors or one stepper motor
  2. Continuous current capacity 14 A
  3. Peak Current capacity 30 A
  4. Thermal Shutdown pin configured to provide output to Arduino Analog Pin
  5. The maximum voltage is 16V
  6. THE maximum PWM frequency is 30 kHz. For most of our Hi-Torque DC motors 12 V, 10 kHz PWM is recommended


  • Wide operating voltage range: 5.5 – 24 V1
  • High output current: up to 12 A continuous (30 maximum) per motor
  • Motor outputs can be combined to deliver up to 24 A continuous (60 A maximum) to a single motor
  • Inputs compatible with both 5V and 3.3V systems (logic high threshold is 2.1 V)
  • PWM operation up to 20 kHz, which is ultrasonic and allows for quieter motor operation
  • Current sense voltage output proportional to motor current (approx. 140 mV/A)
  • Motor indicator LEDs show what the outputs are doing even when no motor is connected
  • Can be used with an Arduino or Arduino clone (through shield headers) or other microcontroller boards
  • When used as a shield, the motor power supply can optionally be used to power the Arduino base as well
  • Arduino pin mappings can be customized if the default mappings are not convenient
  • Arduino library makes it easy to get started using this board as a motor driver shield
  • Reverse-voltage protection to -16 V
  •  Robust drivers:
    • Can survive input voltages up to 41 V
    • Under voltage and overvoltage shutdown
    • High-side and low-side thermal shutdown
    • Short-to-ground and short-to-Vcc protection

Best Online shopping website VNH2SP30 DUAL DC Monster Moto Driver Shield. Here you get VNH2SP30 DUAL DC Monster Moto Driver Shield at a reasonable price in Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Quetta, Multan, and all over Pakistan.

Package Includes:

1 x VNH2SP30 Monster Moto Driver Shield


Customer Reviews

Based on 1 review Write a review
VNH2SP30 DUAL DC Monster Moto Driver Shield

VNH2SP30 DUAL DC Monster Moto Driver Shield